Open Racks

Open Racks

Specification

Usability

The basic usability of these type of rack are to mount the 19" standard equipment with lower depth or where temp/humility is not so much required, these type of racking solution are generally low depth racks with a facility of cable entry & 19" counting profiles, like DDF, MDF Low power Equipments Modern, Networking Equipments and a lot more other equipments.

Structure

The basic structure of open racks are of three banding pillars or of 5 bending pillars along the Top/Bottom depending upon the customer requirement / feasibility of mounting / type of equipments.

The whole structure either shipped assembled or unassembled form for easy transportation and handling. The mounting to floor mounting type with the help of supporting angles of proper thickness, these angles are used on both front & back of the racks to provide strength and grouting of the racks.

Shipped in knock down condition

The open racks and shipped in unassembled from in order to provide easy handling during transportation to the desired location and also to occupy less space in warehousing either in customer premises or in our house.

Durable Textured Polyester Power Coating

Powder coating with texture finish and specially the polyester powder coating, gives longer life to the paint and the shining the rack, as compared to the normal powder coating, with the passage of time, the normal powder coat finish gets dull and rack looks as a old aged rack but the use of polyester powder coat finish, the shining and the finish runs 10 times more than normal powder coat finish.

Standard Configuration

• Height: 6U, 12U, 18U, 24U, 36U, 42U, 47U.
• Depth: 126 mm only
• Color: Siemens Grey or Customized color.
• Packing: Standard C/B Packing.
• Material: CRCA sheet Steel

Available height up to 47U.

Special cable routing panel in the rear (If required)